Examples of using Slave devices in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
To set the Slave devices, set the DMX address to d1.
Other slave devices, which are to be connected to the master device via a DMX-cable.
You don't need to configure Timers for your Slave devices, when the Master-/Slave.
The SL-2001 can access up to 64 slave devices, without requiring any repatching of MIDI cables.
Only one device in a master-slave-chain must be defined as master device. All other devices must be defined as slave devices.
Slave devices such as the UMG 20CM or the UMG 103 are suitable for the outputs in the secondary sub-stations.
UP to 9 WRG 35-1 and/or WRG 35H fan units can be connected 1 master device and 8 slave devices.
controls these Slave devices and is able to start or stop them.
The EtherCAT slave devices read the data addressed to them while the telegram passes through the device, processing data"on the fly.
The installation display PCE-N30B is a Modbus Master for up to 10 slave devices.
With syncPPP, there is no automatic activation of slave devices, they have to be added and removed.
You will have to activate this option so that calls can be started on the MULAP slave devices.
The master/slave architecture is used with the master making requests that are responded to by the slave devices.
Proof test: proof testing interval up to 12 years, Slave devices tested at the press of a button.
Proof test: proof testing interval up to 12 years, Slave devices tested at the press of a button.
Dynamic zone building for up to five zones with one master each and up to five slave devices via KNX objects.
EtherCAT provides the flexibility to add cloud connectivity to existing systems without even touching the controller or updating the slave devices.
First, Master and Slave devices are different for the wire cables and the wire cables.
Combination possibilities of our master and slave devices you will find in the respective overview.
The changed names are automatically updated on the slave devices of the cascade.