Examples of using Low speed in English and their translations into Hindi
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
W3 and water in low speed, uniformly, then middle speed stir for 3-5 mins, mix oil in the paste slowly and uniformly.
especially suitable for all kinds of heavy load, low speed, poor working
Noiselessness Low speed allows the device to operate at less than 50 dB, in high-quality models, the noise figure is about 30 dB,
even in the low subdivision conditions, it can achieve high segmentation results, the low speed operation is very smooth, noise is very small.
long distance, low speed movement, the environment
However, that if you have a motherboard, which only supports low speed, like 1x, 2x
P30 YT5 12.8 89.5 1560 Suitable for the heavy duty rough turning of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions.
For any car, aerodynamic losses, which vary roughly as the velocity squared due to air drag are much greater on the highway than in low speed city driving.
Bucket Elevator 1 Low speed elevation to avoid broken 2 Auto tightening on bucket belts 3 Convenient cleaning of base 4 Special feeding channel which reduces breakage Product features 1 TDTG series bucket elevator vertical hoist is suitable for the vertical transport powder granular
but under no lubrication, low speed high load,
its hardness has raised one time, therefore USES this product in the low speed occasion, may lengthen the general bronze sleeve life one time,
the Australia's Antarctic division, used for low speed propulsion during research activities.
thermal oil heating, with low speed rotation of tank, the material of
Suitable for impact loads and vibrations at low speeds.
It have lower speed, so it is very safety for kids.
If you need the lower speed, please go by foot controller;
Excellent lubrication is achieved even under high loads at low speeds.
People spend a lot of time in the car, going at low speeds.
Most often they work at low speeds and without acceleration.
This is most often heard during sharp turns at lower speeds.
