Examples of using Light output in English and their translations into Hungarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Programming
-
Official/political
-
Computer
it is an excellent option- creates a smooth and clean light output, but the lamp is very hot
Tested with fresh batteries from 30 seconds after the light is turned on until the light output reaches 10% of the initial measurement.
not bright light output, which can cover a certain part of the room.
A LED's light output is reduced as well as degradation when the heat remains stagnant in the LED package.
high light output, fast decay time,
pure xenon gas filling ensure an extra light output.
At present, a 7.5 W Ledino LED module(three LEDs grouped together) generates the same light output as a conventional(light bulb/halogen lamp) 40 W light source.
White light makes it feasible to actually reduce light output, because it is perceived as being brighter than it actually is.
Light output can be thought of as“raw material,”
The end of the life is the point when the light output falls to 50% of the initial value.
The relative light output performance at a temperature compared to the light output at a nominal or test temperature.
Although light sources such thatHID is not high color- and light output allows to use them in the most modern models of lighting products.
This special reflectors to increase the light output by the light it is the radiated to the sides
With just over 0.2 W/ L, the light output is quite low, but the growth of
As the light output can also be adjusted from the camera, you don't need to set it down for lighting control.
This is due to the possibility of stained glass to absorb part of the light output(20%) and darken the room.
For"Hot Tested" products like LUXEON A, it is the relative light output at 100C Tj compared to 85C Tj.
However, in illumination the light is not allowed if the light output attenuation on its 50%.
resulting in the dynamic control of distribution, light output and color.
However, due to self-absorption the scintillation efficiency is lowered significantly and therefore the light output of these materials is strictly dependent on the thickness of the crystal.