Examples of using Back plate in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
enclosure, back plate etc. 5.
So the actual part of the screen just fits the back plate magnetically, like this.
And then there is their location on the sky as seen from a certain latitude on the back plate.
Electronic products shell mold two shot double color injection mold customized abs back plate mould.
the lock hook and the back plate are automatically opened at the time of unloading,
a solid PC back plate that protects against scrapes bumps
The back plate is removable,
suction plate and back plate are all made of specialized anti wear
yaw is induced in the rod before it impacts the last two heavy spaced plates and the back plate of the array.
customized abs back plate mould for electronic products,
rumors showing a large central section on the back plate that differs from the top
It is presumed that if the residual long rod penetrator reaches the 20mm back plate, the deflected penetrator will impact the plate at an angle greater than the structural 68 degree slope.
It is stated on page 701 that"The interference between the back plate and the jet was neglected because the B plate gave a relatively smooth deflection of the jet without characteristic instabilities, whereas the jet was severely scattered by the F plate".
Table size 1450 600mm elevation down up 600mm 700mm back plate up 70 back plate down 17 seat plate up 18 KDC Y electric examination bed is manipulated by electricity It is the mainly and professional exam chair for women diagosis and examination it also suitable for urology examination Surface of the carbon steel….
The back plate was almost certainly designed to act as a final barrier against KE threats
elegant 3 adopting separate design back plate is adjusted by air spring….
the use of tool steel inserts and an RHA back plate in the T-64A turret armour led to a significant improvement in both mass efficiency
Backing Plate Size.
Product: Glassfibre backing Plate for for making flap discs.
Backing plate for a trains' composite brake block must meet the following criteria.