Examples of using Current control in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
However, in the present invention, it is not necessary to limit the switching TFT and the current control TFT to n-channel TFTs, and it is also possible to use p-channel TFTs for both or one of them.
According to experts quoted by Eurasia Daily, Armenian authorities are wary because they realize that current control mechanisms are insufficient.
While the control of the flux is fully decoupled, the current control is affected by the flux level and motor speed. A feed-forward term is therefore required to assist the PI in the current/torque path.
The S-8473 Series is Wireless Power Receiver Control IC, which is configured with an overvoltage detection circuit, a charge current control circuit, a VBAT voltage detection circuit, a UVLO circuit, high temperature/ low temperature detection circuit, etc.
For example, thousands of digital logic gates provide serial interfaces, robust breakdown protection, gate driver current control("IDRIVE") functionality, fault reporting, and low power modes.
The low-jitter laser diode driver provides transmit burst mode average power control(APC) of laser bias current as well as an integrated modulation current control loop extinction ratio control, or ERC.
Charge Pump with Current Control The goal of an LED power supply is to provide a sufficiently high output voltage, and to force the same current through all LEDs connected in parallel.
Because of this, the ballast resistors can be reduced to waste half as much power while providing similar current control as in the previous circuit.
The charge pump provides sufficient operating voltage for the white LEDs, and current control ensures homogeneous white light by forcing identical currents through each LED.
Though not a precise current source, it has adequate current control for the purpose and is able to maintain current control even into a shorted cell.
The demo application running on the C2000 processor is capable of performing real-time control of four different power electronics demo models: Block current control of a BLDC motor Field oriented control of a PMSM Current control of a H-bridge type buck converter Control of a neutral point clamped solar converter.
Owing to the above technology and the self-adjustment technology(self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives in the markets.
In addition to the main notebook-computer application, these devices are useful in other low-power, high-voltage applications(4V< VIN< 28V) such as smart batteries, current control loops, telecom emergency power, and housekeeping power for off-line supplies.
Analog and switching LED intensity control includes individual 8-bit PWM control per output, individual 1-bit analog current control(half/full scale) per output, and a global 3-bit DAC current control that applies to all LED outputs.
With robust resonant-based inverter topology, fast acting programmable voltage, current control loops, arc/short circuit discharge protection and Spellman's proprietary high voltage packaging, the SLM is a cost effective alternative to rack mount units for a variety of demanding scientific, industrial and medical applications.
The unique average current control allows for low THD at all load ranges and excellent compensation of line voltage variations. The soft-start and the open-loop-protection provide high reliability and optimum operating conditions for SiC(silicon carbide) diodes.
The demo application running on the C2000 processor is capable of performing real-time control of four different power electronics demo models: Block current control of a BLDC motor Field oriented control of a PMSM Current control of a H-bridge type buck converter Control of a neutral point clamped solar converter The user manual for the LaunchPad Interface can be found here.
It's also a smart choice for enterprise mobility, tablet, sled and wearable device makers who don't want to compromise thermal management, power consumption, peak current control and EMI for unmatched 2D scanning performance.
output stage current control is used to provide output stage protection from excessive voltages and currents which is further describe in section 3.5.3.
The process begins in step 4810, which includes receiving output power and output signal envelope information of a desired output signal of a vector power amplifier(VPA), In some embodiments, implementing output stage current control using Autobias requires a priori knowledge of the desired output power of the amplifier.