Examples of using Openflow in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
SDN-BGP: A method for establishing interconnectivity between a network managed using OpenFlow and an existing ISP network using the border gateway protocol(BGP).
Ruckus OpenFlow hybrid port mode allows users to enable OpenFlow on any desired port on the Ruckus ICX switch while supporting other traditional switching features concurrently without increasing latency.
NEC is a vendor deploying switches that use OpenFlow and a member of the Open Networking Foundation, the group spearheading the standardization of programmable networking.
I think of OpenFlow like an x86 instruction set for the network- it's low-level, but it's very powerful.
OpenFlow is a framework originally developed at Stanford University and currently under active standards development[OpenFlow] through the Open Networking Foundation(ONF).
That means, by instructing to output all packets to the NORMAL port, it is possible to make the switch operate as a switching hub. However, we implement each processing using OpenFlow.
Stratosphere was established with the goal of creating the next-generation cloud environment through the research and development of a platform based on SDN and OpenFlow(*5), an elemental technology of SDN, and thus resolve these issues.(*6).
In the OpenFlow protocol, some procedures such as handshake required for communication between the OpenFlow switch and the controller have been defined. However, because Ryu's framework takes care of those procedures thus it is not necessary to be aware of those in Ryu applications.
It's not just lip-service to finding a common way to implement SDN's core OpenFlow protocol, the members are putting in tens of millions of dollars in resources for code that will be openly shared with everyone- including non-members.
In this report, we propose a scheme to efficiently measure packet loss rate in each direction of every link in an OpenFlow network, aiming at a small number of measurement devices, a low traffic load to network, and a fast identification of lossy links.
There are a variety of conditions that can be specified to match, and it grows each time OpenFlow is updated. OpenFlow 1.0 had 12 types but in OpenFlow 1.3 as many as 40 types of conditions are defined.
The search giant is testing the use of software-defined networks using OpenFlow in order to lower the cost of delivering information between its facilities, says Urs Hölzle, SVP of technical infrastructure and Google Fellow in an interview with me.
When a FlowRemoved message is received, the OpenFlow controller uses the_ set slave enabled() method to set port disabled state, uses the_ set slave timeout() method to set the idle timeout value to 0, and uses the send event to observers() method to send an EventSlaveStateChanged event.
In addition to those settings, by building the BPDU packet for transmission based on the port information collected when connecting to an Open Flow switch and the root bridge information set in the BPDU packet received by each OpenFlow switch and issuing a Packet-Out message, the controller achieves BPDU packet exchange between OpenFlow switches.
The OpenFlow Switch.
The OpenFlow Version.
SDN-enabled with OpenFlow support.
OpenFlow Switch Test Tool.
OpenFlow Hybrid Port Mode.
OpenFlow Lab: Video Tutorial.