Examples of using Robot's in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Hence, you should inflate the map by the dimension of the robot, in order to allow computation of an obstacle free path that accounts for the robot's size and ensures collision avoidance for the actual robot. .
Candace arrives to the rescue by firing a harpoon gun at the flying ant robot and having Isabella to tie up the rope onto one of the walking ant robot's legs, causing it to fall.
The robot's skills are then transferable, one to another, meaning theoretically you could have a single, non-specialist instructor provide the basic instructions that can end up educating an entire army of robots. .
But when the robot was positioned as a pizza delivery person, holding a box from a well-known international take- away brand, staff readily accepted the robot's role and seemed less inclined to question its presence or its reasons for needing access to the secure area.
The robot's DC motor/ servo motor doesn't work- KOOV Help Center If you have tried sending code or running the Test mode instructing the DC motor or servo motor to move, but to no avail, you should try the following.
Make sure the robot's laser freely rotates: Use a Q-tip to rotate the laser 5 times to the left and 5 times to the right, making sure NOT to put the Q-tip in either hole 8.
The robot not only relieves our machinists from moving parts in and out of the machine, it gives them time to work on their new motivating challenge, which is to program the robot's waypoints with the production setup in mind.”.
I actually have developed various medical robotics and systems: prototype of hip replacement surgery assistant robot"ROBODOC," surgical assistance system for craniofacial osteotomies, visual fixtures which we use information and function to help control the robot's motion to assist a surgeon and so on.
The Platform Drilling Robot's automatic shutdown function enables the shutdown of the electric machine within ten seconds after the absence of action command and leaves null circulation in the hydraulic power system, which can save energy and extend life of the components.
The answer of this specific example over here is 3, although you could argue it could be something else, but 3 is a convenient and common answer, which is this robot's state is determined by its xy location and by its heading direction, which is often called theta.
Of course we measure production time, but the setup teaching time is the most crucial aspect of the robot's performance. If it takes 4 hours to get the robot going between every part, we will not succeed. With our actual robot and gripper, the setup time is short.”.
Function of suppress self-generated sound 2.4 Function of suppress self-generated sound In active audition, a sound occurs by creak of a robot itself in some cases as well as the sound of a motor itself occurred by driving the motor. Although the sound that occurs with robot's movement is small, its sound volume is greater than those of external sound sources according to the inverse-square law since the sound source is near a microphone.
HARK version 1.2.0 Document: Function of suppress self-generated sound 2.4 Function of suppress self-generated sound In active audition, a sound occurs by creak of a robot itself in some cases as well as the sound of a motor itself occurred by driving the motor. Although the sound that occurs with robot's movement is small, its sound volume is greater than those of external sound sources according to the inverse-square law since the sound source is near a microphone.
Robot 's Return.
How do we see Robot's?
The Robot's Mistress?
Robot's ability Human ability AI technology.
The Robot's movements are not smooth.
The Robot's Mistress? No?
Robot's memory synced and locked!