Examples of using Cross-section in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
On(single cross-section curve).
On(multiple cross-section curves).
Cutting tools used to create cylindrical holes, almost always of circular cross-section.
Owners of dry hair are faced with problems of increased brittleness, cross-section of the tips, difficulties when combing and the inability to put the hair in her hair.
Cross-section surveying operations is particularly significant for surface modeling,
Russians make up a pretty disproportionate cross-section of a lot of our assets,' said Donald Jr. in 2008.
This volume presents a cross-section of the most common transport vehicles produced and used by the German army.
Schreger lines“ are visual artifacts that appear in the cross-section of ivory.
Support pipe cross-section in real-time representation and a full 360-degree profile extendable(IMG. 1).
The Profiler lets you view the effect of a factor on the predicted response and shows a cross-section of the response surface. With JMP, you can also.
Russians make up a pretty disproportionate cross-section of a lot of our assets.
Cross-section through the graphene flake shows sub 10nm resolution optical property imaging.
The tubes are delivered in bundles with either circular or hexagonal cross-section weighing maximum 2000 kilograms.
Reduced cross-section for MtT instruments with larger ISO sizes and greater tapers such as the MT 40/.06.
They can therefore be used as sensors and actuators, whose characteristic line is defined by spring rate and hydraulic cross-section of the bellows.
Compact latch envelope and cross-section fits thin-profile doors, minimizes protrusion within the enclosure.
Temper F: Large cross-section forgings in the condition of F temper can be processing,
Cr2Ni4A is widely used for large cross-section carburized parts, such as large gear, shaft, and conditioning components requiring high strength, and good toughness.
Excellent cross-section tightness, structural strength and very low friction-value, wear resistant,
When performing parting operations the resultant vector of cutting forces is inevitably directed sharply across the tool's cross-section, leading to high loads and potential deformation.