Examples of using Micrometer in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Tools are then inspected using Optical Comparators, RAM Optics, and a Laser Micrometer.
In addition, we shall inspect each part during every processing step and 100% inspection before shipment by micrometer.
Micrometer and where you want to install the appropriate shutter,
Using a large diameter high precise micrometer to adjust the coating gap to control coating thickness,
began their own experiments, for several years Aizenbergs group has been using the controlled collapse of structures on the micrometer scale to produce materials with novel optical properties.
Structures of a topography may all be formed to the same height, generally between about 10 nanometers and about 1 micrometer, but this is not a requirement, and individual structures of
generally between about 10 nanometers and about 1 micrometer, but this is not a requirement,
Micrometers is about the diameter of a single liver cell.
Depth micrometers 10604.
In another example, a height of the package is less than about 300 micrometers.
Keyence VG-036T/R LASER MICROMETER SENSOR.
The uncertainty of track position measurements(position resolution) is about 200 micrometres.
An average human hair is approximately 70 micrometers.
A human hair is approximately 100 micrometers.
such as height masters, height gages, slip-gages, micrometers, and vernier calipers for measurements.
Previously, the team at Nabeya Manufacturing used to measure aircraft components using traditional handtools such as calipers and micrometers.
EarthSense also plans to release a map of PM2.5(ultrafine pollution particles smaller than 2.5 micrometers).
You only need a layer thickness of 0.2 micrometers to absorb the energy of the sun.
Prior to adopting FARO's 3D measurement devices, the team at TISC relied on manual hand tools(e.g. vernier calipers, micrometers) to carry out their inspection work.
In the past, the company's Quality Assurance Department used hand tools such as calipers, micrometers, and height gauges to inspect finished parts.