MAIN LINE in Malay translation

• garis utama
• talian utama
• landasan utama
• laluan utama
• barisan utama
• saluran utama
• garisan utama
• main line

Examples of using Main line in English and their translations into Malay

the pressure in main line II will continue to rise to reach the preset changeover pressure of the two-line system.
tekanan di dalam talian utama II akan terus meningkat untuk mencapai tekanan pertukaran pratetap sistem dua-line.

The switch track is where the spur runs off the main line… three miles out to Clayton.
Di atas landasan ini, baji itu akan bergerak 3 batu keluar dari landasan utama ke arah Clayton.

We have already started the long span viaduct crossover along Jalan Kuala Selangor while the commencement of track-laying works on the main line will start by December.
Kita sudah mulakan kerja membina jejambat panjang di Jalan Kuala Selangor manakala kerja-kerja memasang trek di laluan utama dijangka bermula menjelang Disember 2018.

In the example above,"the phone number was a main line at an office building where many different employees apparently registered to order food online.".
Dalam contoh di atas," nombor telefon adalah saluran utama di bangunan pejabat di mana banyak pekerja yang berbeza ternyata mendaftar untuk memesan makanan dalam talian.".

displacing the lubricant in front of the control piston into the relieved main line II.
menggantikan minyak pelincir di hadapan kawalan omboh ke dalam talian utama di lega II.

Located in the heart of Philadelphia's prestigious Main Line, Radnor Financial Center is one of suburban Philadelphia's premier office complexes.
Terletak di tengah-tengah Philadelphia s berprestij Main Line, Pusat kewangan Radnor merupakan salah satu Kompleks Pejabat utama s Philadelphia pinggir bandar.

In this example, the phone number was a main line at an office building where many different employees apparently registered to order food online.
Dalam contoh di atas," nombor telefon adalah saluran utama di bangunan pejabat di mana banyak pekerja yang berbeza ternyata mendaftar untuk memesan makanan dalam talian.".

to the lubrication pump, thus pressurizing the lubricant in this main line.
sekali gus memberi tekanan minyak pelincir dalam talian utama ini.

displacing the lubricant ahead of the control piston into the relieved main line.
penyisihan pelincir menjelang kawalan omboh ke dalam talian utama di lega.

Then, departing 2 cm from the main line, spend the second and cut out the necessary part of the case.
Kemudian, berlepas 2 cm dari garisan utama, belanjakan kedua dan potong bahagian penting kes itu.

to branch pipe used in the main line.
untuk paip cawangan digunakan dalam talian utama.

oil from the other main line.
bekalan gris atau minyak dari garisan utama lain.

The series progressive valve- lubrication divider valve is designed with one main line, lubricate is transferred by lubrication pump.
Siri progresif injap- injap pelinciran pembahagi direka dengan satu baris utama, melincirkan dipindahkan oleh pam pelinciran.

T-shaped having two outlets, at 90° to the connection to the main line.
pada 90 ° ke sambungan ke garisan utama.

T-shaped having two outlets, at 90° to the connection to the main line.
pada 90 ° kepada sambungan ke garisan utama.

fitting having two outlets, at 90° to the connection to the main line.
pada 90 ° kepada sambungan ke garisan utama.

has two outlets, at 90° to the connection to the main line.
pada 90 ° ke sambungan ke garisan utama.

When the pressure lubricant is supplied to the metering device via main line, the control piston starts moving in the direction, displacing the lubricant in front of the control piston into the relieved main line.
Apabila pelincir tekanan dibekalkan ke peranti pemeteran melalui talian utama, kawalan omboh mula bergerak dalam arahan itu, menyesarkan minyak pelincir di hadapan kawalan omboh ke dalam talian utama di lega.

Bearing lubrication valve SSV14 series has designed with only one main line, usually by a piston pump lubricant injected into the main line and through the single progressive distributor lubricant one level to the next one distributor
Bearing injap pelinciran siri SSV14 telah direka dengan hanya satu garis utama, biasanya dengan pelincir pam omboh disuntik ke dalam garis utama dan melalui tunggal progresif pengedar pelincir satu tahap ke satu pengedar yang akan datang

the change-over valve of the system operates to connect main line which has so far been under pressure to the lubricant reservoir of the lubrication pump and the lubricant in main line is depressurized.
injap perubahan-over sistem beroperasi untuk menyambung talian utama yang setakat ini telah berada di bawah tekanan untuk takungan minyak pelincir pam pelinciran dan pelincir dalam talian utama depressurized.