Examples of using Resistivity in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
the surface resistivity(10E10 ohm)
the resistance between these contacts is 1Ω, then the resistivity of the material is 1Ω/m.
Six high, namely the original calorific value of coal high, high specific resistivity, high mechanical strength,
the surface resistivity(10E10 ohm)
High Quality PPS polyphenylene sulfide Plastic Sheet PPS dielectric constant is small a low dielectric loss surface resistivity and volume resistivity is not sensitive to the change of frequency temperature humidity is a good electrical insulating….
ABS Black Semiconductive Plastic Sheet with the surface resistivity 10e6~10e9,it mainly used in the telecommunications,
With its surface resistivity of 109 to 1011ohm/square
Junior Engineering Geologist and since joining the organization, he has been involved in ground investigation work, especially projects in terrain mapping, resistivity survey, mapping
contacts is 1 Ω, then the resistivity of the material is 1 Ω⋅m.
made of the copper material with low resistivity, good electrical conductivity,
known for abrasion resistance, chemical resistivity, stability in water,
made of the copper material low resistivity is good electrical conductivity,
the surface resistivity is between 10E9 to 10E11 in the wet weather.
Introduction The natural color is the PP material color no need to add the color master batch it can avoid the color batch permeate out of the PP then contaminate the object in the high temperature the surface resistivity is 10E10 10E11 usually….
while the surface of the paint film induced high voltage(high resistivity) is not easy to cause static electricity,
the surface resistivity is 10e6-10e8 ohm,
original calorific value of coal high, high specific resistivity, high mechanical strength,
six high know as original calorific value of coal high, high specific resistivity, high mechanical strength,
then contaminate the object in the high temperature, the surface resistivity is 10E10-10E11 usually,
the peel force is between 35-60 PSI, and it have good physical properties and electrical conductivity at the same time, the surface resistivity is between 10E4 to 10E6, it is used for high precise