Examples of using Drainage layer in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The drainage layer should be 3-4 centimetres high
The thickness of the drainage layer should be at least a quarter of the height of the pot,
The drainage layer should be 3-4 centimetres high
When planting this variety in hanging baskets, a drainage layer is also necessary, but it can be about 10 cm.
lay the drainage layer, poured on top of the substrate.
If the pot does not have a hole you should form a drainage layer by using expanded clay or crocks.
In order for the moisture and nutrition to reach the roots, it is recommended that several plastic irrigation tubes be vertically inserted into the drainage layer at the landing site.
drawn up along the wall between the drainage layer and backfilling.
Geotextile composites can also be used as drainage layers.
coarse fractions, drainage layers in ditches, structural backfill,
it is advisable to make a drainage layer with gravel.
At the bottom of the tank lay a drainage layer with a volume of 1/3 part of the pot.
It is desirable to put a drainage layer on the bottom of the pot
Fill in any hollow areas with a drainage layer of gravel or sand which will both prevent waterlogging
Fill in any hollows between the stones with a drainage layer of gravel or sand,
On a loamy, heavy soil in a hole, a drainage layer is made, up to 30 cm thick, of typical materials- sand, rubble, brick fragments.
If you plant clematis directly into the ground, then at least 20 cm of claydite or rubble drainage layer should be laid on the bottom of the prepared pit.
The bottom of the tank is filled with a drainage layer, which may consist of small pieces of foam,
which is why it is also a good drainage layer, which is part of the system of wastewater disposal systems,
implement the creation of a drainage layer.