Examples of using Pipe diameter in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The individual tube wiring perform pipe diameter of 50 mm, and the bulk- 100 mm sewer pipes. .
Butt joint pipe diameter nominal bore up to 25 mm inclusive may be performed on the processing plant. When welding.
Also, we need the same number of scraps pipe diameter of 83 mm, they can be taken from the waste.
Pipe diameter remains constant throughout the"life" of the term,
The inlet pipe and outlet pipe of variable frequency pump must be larger than the pipe diameter of the pump in diameter. .
We have 3 jaws or 4 jaws chucks for chosen, and pipe diameter from 50 mm to 1200 mm.
it is worth remembering that the pipe diameter should be in the range of 8- 14 centimeters.
Pipe diameter- 60 mm, and a hole in the distributor should have a
For the calculation, specify the inner and outer pipe diameter and total length of the pipeline.
The compound turned tight, the seal ring diameter selected to be less than 20% of the pipe diameter.
The pipe diameter should reach 150 mm,
By keeping the header pipe diameter near constant, the energy in the wave is preserved because there is no expansion until needed later in the cycle.
For heating pipes, holes must be cut out which are 3 cm larger than the pipe diameter.
Extractor hood with backflow flap Stainless steel Suitable for pipe diameter: 12.5 cm Wallair N31846 £83.99.
When the pipe diameter is ranging within 100mm, there is no need to adjust the clamp.
Thereafter Drill hole for the pipe diameter is 2 mm longer than the pipe itself,
At the same time, the horizontal accounting value is also related to the concrete characteristics, pipe diameter and so on.
The service life of such wells will dependthe quality of the casing and the pipe diameter depends performance.
Experts advise to choose the pipe diameter for giving not less than 50 millimeters,
In general, the pipe diameter is adjusted individually,