Examples of using Cyclic loading in English and their translations into Portuguese
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
submitted to the application of cyclic loading and variation in subgrade layer moisture.
A comprehensive evaluation of the effect of cyclic loading on the load-displacement response of single-helix anchors in sandy soils is presented here,
At present work is intended to study crack growth in cyclic loading in the case of quasi-brittle materials, introducing a damage mechanism,
analyze the influence of cyclic loading on the flexibility of commercial endodontic instruments tf¿and race.
especially in the presence of cyclic loading or when it leaves the small strain regime.
as well as the damage modes caused by the application of cyclic loading.
which is the change in a material's structure that occurs when subjected to stress during cyclic loading.
The model proposed is used to describe the damage evolution on a conductor cable in the cable-clamp contact zone under an initial field of plastic strain and cyclic loading.
such as cyclic loading, load thermostatically controlled,
Since the tests used as databases were also performed under cyclic loading conditions, it was possible to assess the method proposed by jewell(1996)
the soil testing under cyclic loading conditions had its interest renewed in the last years.
Being a power law relationship between the crack growth rate during cyclic loading and the range of the stress intensity factor,
usually does not take into account the possibility of this change during the cyclic loading, ie, place the relaxation process,
provided that the behaviour of the joints under cyclic loading is determined by tests either on single joints
For the cyclic loading test, edentulous mandibular models were used.
Influence of cyclic loads.
The sinusoidal cyclic load with a frequency of seven Hz for one million cycles was applied within the range of 230 and 2300 N.
The flow rate decreases with time or the cyclic loads, and although it remains for a long time,
Tests with cyclic loads are performed in two series,
Minimize risk of failure from cyclic loads with a broad range of offshore-specific fatigue analyses, including wind,