Examples of using Drying process in English and their translations into Portuguese
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
The solvents are incinerated in the reactors and the heat generated is recovered for use in the drying process, saving the company 80% of its previous energy requirements.
condensate system audit simulates the drying process with various operating parameters.
And you can be sure that every drying process in the future will be exactly the same.
First, the residue of the passion fruit processing was submitted to a drying process on trays, under an air flow at 45º c, until reach 10% of humidity.
The drying process is an important step in the production of biomass,
In this work, a study about the drying process of the microalgae scenedesmus acuminatus in thin layer and spouted bed was conducted.
Cast-tape drying(ctd) is a conductive drying process, in which a thin layer of a liquid material is spread on an over flexible support.
After the drying process and formation of coatings,
The advantage of drying process for the fruit pulp industry,
numerical simulation of the tomato pulp drying process, validating the results with experimental data.
During the drying process, it was measured
Drying process in the ceramics industry aims to remove water from the brick before it goes to the firing phase.
In the spray drying process, the influence of process conditions on the vitamin c and carotenoids retention was
There is no need to accelerate the natural drying process, ventilate the area
Superior Quality During the conventional drying process, wood deforms
In addition, during drying process, the flatness of wood veneer is of great importance.
The Automatic Coating Machine TMAX-DYG-135 is mainly used for Slurry drying process of lithium battery electrode coating.
He already has patents pending for drying process enhancements that he developed during his studies at Bühler.
Though these methods may work, the slow drying process is recommended because it is more gentle to the seeds.
With this air temperature, the seed must be with less than 40 °C in the end of the drying process(12-13% moisture)- a temperature that does not affect the seed.