Examples of using Finite element model in English and their translations into Portuguese
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
This work presents the development of a finite element model coupled with a criterion of damage in order to analyze the process of lateral cutting of hot rolled strips in continuous pickling lines of the companhia siderúrgica nacional csn.
The finite element model presented and improved in this work was initially developed with abaqus, within the research
A finite element model was built with solid elements in ansys program,
To validated the proposal was developed a finite element model to the sleeves comparing the results obtained of the model with the current manufacturing process
the continuous strenght method; and through a finite element model developed in ansys program.
A finite element model of quasi-isotropic carbon/epoxy joints,
The finite element model solves the coupled nonlinear static and dynamic problems in two steps:(i)
Analyze the ability of monopile foundations to resist lateral loads on the basis of a 1D Timoshenko beam finite element model, accurate even for large diameter monopiles,
iso 14346 through out a finite element model developed in ansys program.
an analytical model with consideration of structure torsional stiffness obtained from finite element model.
using results from a simplified finite element model as input for the vdi 2230 part 1 guideline.
were experimentally identified, so that the finite element model was as close as possible to the real dynamic behavior of the cantilever beam.
They were represented and calculated as finite element models in RFEM.
The research presents a methodology to develop simple finite element models capable of reproducing the behavior of structural layers of flexible pipes under hydrostatic pressure up to collapse.
Ballistic research involving finite element models can reproduce computational biomechanical conditions,
Among them, one can mention finite element models, principal component analysis,
Create 3D finite element models Efficiently create models with a logical geotechnical workflow.
In this phase, we also carry out the structural calculation of the building using contrasted finite element models with real load tests.
Within Structural Dynamics more often than not finite element models, setting out from knowledge within Solid Mechanics, are used.
The computational simulations were performed on finite element models based on cone beam computed tomography images of a 12 years old patient.