Examples of using Phasor in English and their translations into Portuguese
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
from the point of view of synchronized phasor measurement technology.
Phasor notation can only represent systems with one frequency, such as a linear system stimulated by a sinusoid.
When we solve a linear differential equation with phasor arithmetic, we are merely factoring formula_13 out of all terms of the equation,
It can display the measured voltage and current phasor diagram, the users can know the device wiring correctly
The projection of a phasor onto the vertical axis corresponds to the momentary value of U respectively I.
of new monitoring technologies, such as synchronized phasor measurement systems.
which is what makes phasor notation possible.
As well as their behavior in the presence of white noise in the phasor provided by the synchronized phasor measurement system.
Their accuracy depends on the correct relay parameterization, phasor estimators, and correct usage of distance characteristics.
These expressions together may be substituted into the usual expression for the phasor representing the output: :formula_22:formula_23.
Phasor measurement units(pmus), are promisor equipment
so the angle between each phasor to the next is 120°(2π/3 radians),
This paper introduces the phasor measurement units and the synchronized phasor measurement systems, in addition to developing
This application processes synchronized phasor measurements to characterize the damping ratio level of observable oscillatory modes
Multiplication of the phasor A e i θ e i ω t{\displaystyle Ae^{i\theta}e^{i\omega t}\,} by a complex constant, B e i ϕ{\displaystyle Be^{i\phi}\,}, produces another phasor.
systems with radial topology, using phasor measurement units pmus.
When complete, the WISP project will involve 18 utility participants deploying over 340 Phasor Measurement Units(PMUs) in a footprint covering all
which is a most usual interference in fault conditions and delays the phasor estimation convergence.
In this dissertation the results for several methodologies for system wide model validation using synchronized phasor data are presented. four methods for diagnosing the existence of errors in simulation models are proposed.
Distance relays generally require only the phasor voltage and current measured by the relay in the substation