Examples of using Outer diameter in English and their translations into Romanian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
Size: inner diameter 5.5mm, outer diameter 6mm, length 197 mm.
manual measurement of the outer diameter of steel pipes is not only unsafe,
then precise grind the outer diameter to be final specification.
The connector jack must fit to the plug with an outer diameter of 3.5 mm, an inner diameter of 1.35 mm, 9.5 mm in length, with positive polarity.
Hielscher Ultrasonics manufactures an ultrasonically vibrating wire die holder that works with standard wire dies of up to 42mm outer diameter.
is depleted during operation, the coil set increases as the outer diameter decreases.
Washers usually have an outer diameter(OD) about twice the width of their inner diameter(ID).
There are products with a landing in the holes 10 mm, while their outer diameter is 100 mm
For mounting on round tubes with an outer diameter of 50 mm(1½) and a wall of at least 3 mm.
Convenient connection to threadless taps with an outer diameter between 15 and 20 mm.
The outer diameter surface of bearings is shaped to the crowned runner surfaces with R500( suffix U).
manufactured from a material with an outer diameter of 5 cm.
thickness of 3-5mm and inner diameter of more than 20mm and outer diameter of less than 800mm.
And since we need to machine curved surfaces on the part's outer diameter.
MWNTs have a different wall structure, a smaller outer diameter, and a hollow interior.
cans from inner diameter 16 mm up to outer diameter 68 mm.
capable of producing seals with maximum outer diameter of up to 720 mm.
mechanically processing the tube blank in the third step to obtain a semi-finished product of a tubular target having an outer diameter of 135 mm and an inner diameter of 105 mm;
For example, pipes PN16 from the manufacturer Wavin Ekoplastik, an outer diameter of 110 mm with a wall thickness of 15.1 mm,
Step 3: The tubular tantalum blank coated with the anti-oxidation coating in the second step is extruded into a concrete tube having an outer diameter of 140 mm and an inner diameter of 100 mm under the conditions of an extrusion temperature of 1050° C and an extrusion ratio of 6.6;