Examples of using Decimal point in English and their translations into Russian
{-}
-
Colloquial
-
Official
A decimal point can be entered after the first digit is entered,
then multiplying the result by 100 to get a percentage figure usually expressed to one decimal point.
Settings Smoothing and after the decimal point- smoothing peaks graph
Before you confirm your order, also check that you have the correct number of digits before and after the decimal point.
The blinking decimal point on the"M" displays indicates the setting up of displaying of timer for the actual cooking zone.
After the decimal point the numerator of the fractional parts must have the same number of digits as zeroes in the denominator.
results in mg/dL will never have a decimal point e.g.
Today, you will need to effect the decimal point when you multiply it by 10 100 and 1000.
The decimal point at the side of the power level will indicate that the plate has the TIMER function activated.
displayed with two digits after the decimal point.
ALIGNED(1,6) controls the format of the output with 1 digit before and 6 after the decimal point.
Decimal Point R/W The number of digits to the right of the decimal point which should be used by an interface device in displaying the specified parameter.
You don't mind if I have Planning and Research… pull all your CC numbers. Make sure there's not a decimal point missing between the one and the two?
include 3 digits after the decimal point for greater accuracy.
variables consist of an integer part, a decimal point, and a fractional part.
Burner version:- If the decimal point“•” appears on the displays,
Ifthe digit immediately following the decimal point isbetween 5and 9then digit 1is added to the integer, and the digits after the decimal point are not taken into account;
TRK_SCALE Tracking Scale R/W The high and low scale values, engineering units code and number of digits to the right of the decimal point associated with TRK_VAL.
low scale values, engineering units code and number of digits to the right of the decimal point.
Ifthe digit immediately following the decimal point isbetween 0and 4only the integer istaken into account, and digits after the decimal point are not considered;