Examples of using Front surface in English and their translations into Russian
{-}
-
Official
-
Colloquial
with the third metatarsal excluded from the front surface of the metatarsus over 40% of its upper length.
The edge-to-edge screen of the iPhone X(that is, across the front surface) also suffers from a cut in the upper part where sensors,
Pus and cheesy mass break down in the form of sinter abscess on the front surface of the spine in the pelvic cavity.
Target Point" means the intersection of the projection of the headform longitudinal axis with the front surface of the vehicle see point A in Figure 6.
on the head restraint, point D being the intersection of a line drawn from point C horizontally in the x-direction, with the front surface of the head restraint.
If myocardial infarction is located near the front surface of the heart(left ventricle)
The area of measurement is anywhere on the front surface of the head restraint between two vertical longitudinal planes passing at 85 mm on either side of the torso reference line.
When the front surface of the head restraint is impacted in accordance with paragraph 7.2.1.,
Impact the front surface of the seat or head restraint at any point with a height greater than 635 mm from the[R-point][H-point]
When the front surface of the head restraint is impacted in accordance with Annex 7,
Impact the front surface of the head restraint at any point with a height greater than 635 mm from the R-point
the exterior parts on the front surface, do not scratch si it shows no wear marks no more than one year after application,
which leads to heating the front surface and back and MacBook Pro.
Backset" means the horizontal distance between the front surface of the head restraint and the rearmost point of the head restraint measurement device,
including the front surface of orthotropic plates,
applies the laser directly on the front surface of the eye to achieve the desired effect.
is at that point not excluded form the front surface of the metatarsus, so that the foot is not arctometatarsalian.
with a rotational module to coat the substrate's front surface on the carrier return track.
Bonnet leading edge reference line" means the geometric trace of the points of contact between a straight edge 1,000 mm long and the front surface of the bonnet, when the straight edge,
Frosted front surfaces: no.3.