Examples of using Level switch in English and their translations into Russian
{-}
-
Official
-
Colloquial
Liquid Level Switch can be used to indicate levels of engine oil,
Level switch 1: The storage tank is replenished immediately when the water level falls below the full level. .
and multi-point level switch for big tank up to 35M,
If you only use one level switch, then the‘IN'input is used for excess pressure safety.
Level switch OPTISWITCH 3100 C The following table provides an overview of the switching conditions depending on the set mode and the level. .
If one level switch has been programmed, then a delay to disable the installation can be set in the programming of the raw water tank.
OPTISWITCH 3100 C level switch with signal conditioning instrument1 The following table provides an overview of the switching conditions depending on the adjusted mode of the signal conditioning instrument and the level. .
If no level switch is connected to an input(IN1 to IN8) for the selected
Stop The‘Stop'(ST) input function can only be used if only one level switch is used.
A flat seal between the tank and level switch flange provides the seal between the tank and the environment.
The production of desalinated water can be launched depending on the level switch(s)(HL and LL) or manually.
3dB, tweeter level switch, and inline speaker leads.
when the level switch(3) indicates that the level is too low.
Level switches enhance process reliability by delivering fast,
Agency approvals| point level switches& reed chain transmitter.
Desalinated water production via manual controls or level switches.
Magnetic Level Switches for Side Installation MS.
These level switches are designed to be installed on tank tops.
The level switches are classified into temperature class T4.
The level switches in the NS OM-xx series are used to monitor liquid levels in tanks.