Examples of using Low friction in English and their translations into Russian
{-}
-
Official
-
Colloquial
Our HabiPLAST timing belt support guides are designed to allow HabaSYNC timing belts to run smoothly across a low friction surface.
Clean engines and low friction reduce energy loss in the engine
Timken designed type TSR thrust spherical roller bearings to achieve a high thrust capacity with low friction and continuous roller alignment.
Aptan has controlled stretch characteristics and a soft, low friction finish which reduces the effects of needle heat and offers excellent abrasion resistance.
Low Friction brackets Damon
Their high levels of corrosion resistance, low friction values to achieve low shear force provide the best service lives and durability.
These offer very low friction, and are additionally treated on the contact surface between the sheets with silicone grease, further reducing friction. .
For motorcycles, stability on these low friction surfaces is more important than stopping performance,
A wet low friction surface immediately followed by a wet high friction surface of> 0.8 PBC.
In the case of ABS tests on a low friction surface(paragraphs 4.9.4. to 4.9.7.),
A low friction surface immediately followed by a high friction surface with a PBC>= 0.8.
The guidance system shall be fitted with low friction guides that allow the impactor to move only in the specified direction of impact, when in contact with the pendulum.
A particularly low friction linear guide makes it possible to also safely measure delicate and very small tools.
In the case of ABS tests on a low friction surface(Annex 3,
Long operation life Introducing anti-abrasive low friction fabric brings high durability at higher torque.
This procedure requires that there is very low friction between the vehicle tyres
This material containing silicone achieves excellently low friction values in dry operation
The unique properties of MT1, including low friction, high SG
Inside the bulb, on a low friction spindle, is a rotor with several(usually four)
High resistance, low friction, good chemical resistance,