Examples of using Speed range in English and their translations into Russian
{-}
-
Official
-
Colloquial
Workpiece weight 3000 kg Spindle SK-50 Speed Range up to 4000 min-1 35.000 h Power on, 10.000 Spindle-hours, Measurements 5 x 3,70 x 3 m Weight 16 to.
negative trimmer range on the Luna giving a very nice and usable speed range.
High speed range:> 5 m/s The speeds of linear motors are vastly higher than traditional mechanics.
New APP Technology(Automatic Pressurised Profile)- commonly known as"Shark Nose"- installed for constant internal pressure allowing wider safe speed range and superior glide.
The speed range of 19 km/h including the additional acceleration is the minimum requirement(= 2+ 15+ 2)
the gear ratio capable of covering the speed range of 19 km/h.
Load the machine is 250 kg, the speed range of 30 to 60 km/ h.,
The run-flat warning system shall be capable of operating within a speed range from 40 km/h to the maximum design speed of the vehicle.
Reference speeds may be continuous speed points covering the complete test cycle speed range.
It is allowed to be outside the speed range for a maximum cumulative time of 2 minutes during the learning phase.
Annex 7 Paragraph 4.7.2.1. and Paragraph 4.7.5.1.: The speed range comes from the following calculation.
The principle of designing of sandwich panels made from polymer composites with high impact strength at intended speed range of impact loading was first proposed.
effective handling, wide speed range, high speed and stability in turbulence.
Drive the vehicle for a minimum of 20 minutes within the speed range in paragraph 1.4.2. to this Annex, and with an average speed of 80 km/h.
Universal two-speed drill, up to 13 mm with ideal speed range for steel and stainless steel.
a wide operating speed range for level flight.
Beater drum ensures a high carrying capacity of grain mass due to a large diameter and a speed range from 430 to 1070 rpm.
The standard-fit tyre monitoring system allows the driver to select tyres type and speed range parameters.
Another innovation is the wide, freely selectable speed range from 100 to 3,000 min -1.
Base oil viscosity DIN 51561 Influences speed range and load-bearing capacity of a grease.