Examples of using Zero point in English and their translations into Russian
{-}
-
Official
-
Colloquial
The axes are mutually perpendicular and intersect at one point called the zero point.
Outstanding temperature stability at zero point.
Absolute polar coordinate Always refer to IGEMS fixed zero point.
Zero point and measurement reading are not affected by static pressure changes.
Type 1 partial delivery zero point at the top.
After switching on, the zero point for all measurements is at the rear edge of the device.
high temperature and zero point stability.
fully automatic zero point measurement.
Failure to return the arrows on the zero point of the scale after removal of the load does not exceed 0.5 scale division value;
and never at the zero point.
Tolerances cannot be applied to reference features, such as zero point, alignment, and reference plane.
test modules with zero point clamping systems.
In scientific literature, the 1 bar pressure level is usually chosen as a zero point for altitudes-a"surface" of Jupiter.
Reference features, such as a zero point, alignment, or reference plane,
Absolute is an absolute scale in LUFS units; Relative is a relative scale in LU units with 23 LUFS zero point.
a point(the centre, zero point), inscribed in a square.
Z are referenced to the workpiece zero point.
between reference marks and zero point.
Align the measuring tool by placing it against a reference workpiece in such a manner that the desired new zero point is displayed as the measuring value e.g., 45.1.
Effect of system pressure Ambient temperature effect on zero point and span in relation to the set measuring span.