Examples of using Adsorption in English and their translations into Serbian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
This type of adsorption system functions as a Nitrogen scrubber,
Nitrogen and oxygen in the air have different adsorption performance on zeolite(ZMS)
Using oxygen adsorption tower technology selected in a reliable,
In the process of pressure swing adsorption, the adsorption pressure is constant,
This type of adsorption system is therefore functionally a nitrogen scrubber leaving the other atmospheric gasses to pass through.
Because cellulose media is better at adsorption and impingement, it can remove more contaminants than glass
Dryer for Twin Towers structure filled with adsorbent, adsorption tower for drying,
The regeneration of the molecular sieve is achieved by rapidly dropping the adsorption tower to atmospheric pressure to remove the adsorbed O2,
which enables our VOC concentrator to use the adsorption air with high temperature.
good adsorption, and effectively solve the problem of general printing platform is easy to curl the first layer.
The swing adsorption process in each of the two adsorbers consists of two stages running at intervals of a few minutes.
The use of pressure swing adsorption technology from variable ventilation,
At the same time, after the adsorption tower is switched, it will recharge some of its own gas to the adsorption tower.
alternating pressure adsorption and decompression regeneration,
by using technology of PLC program control tower to produce nitrogen adsorption, the desorption tower regeneration,
Adsorption rate if further consideration, will be able to distinguish between adsorption of nitrogen and oxygen effectively.
Pressure Swing Adsorption(PSA) is a highly effective
Jiangsu Jiayu JRR series waste heat regeneration air dryer is a new generation dryer designed on the basis of adsorption dryer, which is more efficient
can conduct plasma exchange, adsorption, perfusion, and filtration of inflammatory mediators such as endotoxins
The adsorption air dryer needs regeneration of about 12-15% because the desiccant needs to be regenerated after the water absorption is saturated.