Examples of using Feed roller in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Paper will be ejected and feed roller cleaning will be completed.
Can be conveyed on gravity feed roller conveyors.
Open the scanner hatch and check to see if the feed roller is installed.
Included 2 sets wire feed roller clothespole.
Feed roller height for molding.
Engine speed automatically increases if the feed roller climbs onto new material
disconnect the power cord before cleaning the paper feed roller.
productivity using the patented SmartGrind system and hydraulic feed roller down pressure.
productivity using the patented SmartGrind system and hydraulic feed roller mdown pressure.
next to the feed roller.
open the small cover next to the feed roller.
The gears in the gear box and the feed roller bushings should be lubricated periodically.
If the feed roller is not installed,
Push the red handrail to stop the feed roller. the handrail can be locked in pulled position
The workpiece should not be in contact with the feed roller when you turn the tool on.
you may need to install a feed roller see“Install the feed roller” on page 3.
then the two sheets are firmly pressed together with a feed roller.
SmartFeed also senses feed roller jams and responds by automatically shifting material back and forth.
Dual planetary feed roller drives push material into the drum with outstanding efficiency.
Switch on the planer/molder and insert the workpiece until the feed roller begins to advance the.