Examples of using Flat-head screwdriver in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Insert a flat-head screwdriver in the lower slot(see 7) and turn to pry
Use a flat-head screwdriver to pry back the hooks(not shown)
Using a flat-head screwdriver, press the screwdriver against the hot pad and under the edge of the light cover.
Use a flat-head screwdriver to move the voltage selector on the rear panel to the appropriate position for the area in which this unit is used.
Using a flat-head screwdriver, insert the tip into the line dimple
Use Flat-Head Screwdriver to tighten height rod to scale from the back see diagram 6b.
Use a flat-head screwdriver or similar device to remove the plug(A)
With a flat-head screwdriver, carefully pry off
Remove the screw at the end of the long valve stem using a flat-head screwdriver.
Using a coin or flat-head screwdriver in the slot on the battery door, rotate the door just slightly to the left and remove.
use a flat-head screwdriver to remove the cap then insert 1-2 drops of Bantam Oil.(Fig. E)*Over spraying can result in an overflow of oil that may stain clothing.
Required tools: flat-head screwdriver.
Required tool: flat-head screwdriver.
Large flat-head screwdriver or T-25 Torx screwdriver. .
Medium flat-head screwdriver or T-20 Torx screwdriver. .
Flat-head screwdriver Small screwdriver, flat head or other.
Using a flat-head screwdriver, unscrew the brush cap.
Insert a flat-head screwdriver into the tube lock.
Wedge the fuse holder out of its housing with a flat-head screwdriver.
Use a large flat-head screwdriver or a T-25 Torx screwdriver to loosen the.
