Examples of using Keepalive in English and their translations into Spanish
{-}
-
Colloquial
-
Official
KeepAlive Pro(version gratuite) télécharger pour PC.
Descargar KeepAlive Pro para PC(versión gratuita).Optimized visualization of keepalive and boolean modules in static graphs.
Optimizada la visualización de los módulos keepalive y booleanos en las gráficas estáticas.Specifies the interval in seconds between individual keepalive probes.
Especifica They are faster because of something called keepalive.
los FTP, a causa de algo denominado keepalive.Bluetooth keepalive- is a useful application for Android devices which supports the signal of Bluetooth-connection active.
Bluetooth keepalive: una aplicación útil, para los dispositivos Android, compatible con la señal de la conexión Bluetooth activa.Optional You can configure PuTTY to automatically send'keepalive' data at regular intervals to keep the session active.
Opcional Puede configurar PuTTY para que envíe datos"keepalive" a intervalos regulares para mantener la sesión activa.Each server has a"Keepalive" that updates its state
Cada servidor tiene un"Keepalive" que actualiza su estado,enter 180 to configure PuTTY to send keepalive data every 3 minutes.
escriba 180 para que PuTTY envíe datos"keepalive" cada 3 minutos.to avoid false results. server_keepalive Time before classify the server as down.
server_keepalive El tiempo antes del que declarar al servidor como caído.Keepalive detection takes effect unidirectionally rather than bidirectionally on a GRE tunnel.
La detección de keepalive tiene efecto unidireccional en lugar de bidireccional en un túnel GRE.Keepalive packets maintain NAT mappings for IKEv2 connections.
Los paquetes Keep-Alive mantienen las asignaciones NAT para las conexiones IKEv2.When a keepalive is enabled and it detects no incoming upstream packets, it will fail-over.
Cuando se habilita un keepalive y no detecta ningún paquete ascendente entrante, fracaso-sobre.The maximum number of keepalive probes TCP should send before dropping the connection.
Número máximo de sondas''keep-alive'' que TCP debería enviar antes de abandonar la conexión.For KeepAlive requests, only the first request is counted towards this limit.
Para peticiones KeepAlive, solo la primera petici n se tiene en cuenta para este l mite.because of something called keepalive.
a causa de algo denominado keepalive.You can change the interval by using the NAT keepalive interval parameter.(iOS 9.0+).
Puede cambiar el intervalo con el parámetro Intervalo de NAT Keep-Alive.(iOS 9.0+).Set the keepalive to one second on the egress port. KeepAlive.
Fije el keepalive al segundo en el puerto de egreso. Keepalive.The AC sends response packets when receiving the keepalive and echo packets.
El AC envía paquetes de respuesta cuando recibe los paquetes keepalive y echo.Set the serial line encapsulation to HDLC and keepalive to 10 seconds.
Fije el encapsulado de línea serial al HDLC y el keepalive a 10 segundos.A DS failure will not be tracked if keepalive is off.
No seguirán a un error DS si el keepalive está apagado.
