Examples of using Pppoe in English and their translations into Spanish
{-}
-
Colloquial
-
Official
If your ISP is PPPoE skip down to the PPPoE section.
Contacted the service provider for information about its PPPoE access server.
Select User Name, enter the PPPoE user name, then select Done.
User Name: Password: Enter your PPPoE user name.
Be FIRST to write your own review of pppoe. exe.
IP Address: Enter the IP address(Static PPPoE only). subnet mask.
(Continue the following steps if using PPPoE) 3.
see Creating PPPoE Tunnels for DSL Support.
Continue to the next steps if you are using PPPoE connection.
If your ISP requires you setup PPPoE and authenticate with a username
In addition to network supports DHCP/ Static/ PPPoE and other features such as VPN, VLAN, QoS and provisioning.
Static& Dynamic IP, PPPoE, PPtP most of the time used for ADSL and Cable Modem connections.
it will read the PPPoE radius server IP address
If your provider requires you to make a connection by using PPPoE(with username and password),
check with your ISP to see if they use PPPoE.
RFC2684 Routed Mode, PPPoE, and PPPoA.
the users thanks to the network management(VAP, Hotspot, PPPoE, etc.) and the segmented services VLAN.
Like cFos Broadband Connect it achieves a much higher throughput than the PPPoE driver shipped with XP/Vista/7 with a fast enough Internet connection.
while IPv6 traffic travels via PPPoE to the IPv6 provider.
Technical background: cFos IPv6 Link uses the existing network connection via router or PPPoE and allows the use of IPv6 under Windows 7,