Examples of using Stereo mode in English and their translations into Spanish
{-}
-
Colloquial
-
Official
In stereo mode, channel 1 acts as the master control
To cancel either the stereo mode or the 2CH downmix mode,
When a channel pair is in stereo mode the two channel indicator lights for those channels will light.
4 seconds in LP2 stereo mode, and 8 seconds in LP4 stereo mode.
In stereo mode, a stereo signal will be heard if the station is broadcasting a stereo signal
For groups“B” and/or“C”, you can also place the INPUT SELECT switch to the ON position for Stereo mode.
In stereo mode, you can hear stereo sound when a stereo program is broadcast.
You can also select an audio output between double mode(in which the two systems play the same sound) and stereo mode stereo sound.
To return to stereo mode press and hold in the Select button until the display shows"Audio mode. .
The CMX 800V can operate in 70 Volt operation in Stereo mode or Bridge Mono mode. .
mono- Press the Stereo/Mono button on the remote control to alternate between Stereo mode and Mono mode. .
select the stereo mode or the mono mode with the button- 22.
When it's in stereo mode, STEREO appears under the left side of the frequency in the display,
Switches between stereo playback, Auto level control stereo mode(page 31) and Front Stage Surround
In the stereo mode(Focus mode off)
Since there is no rear output in Stereo Mode, there is no rear volume level adjustment in this mode. .
In Stereo mode, the front input plays on the front satellites
Stereo mode must be selected if you are using the‘Record/multi room output' on the rear of the subwoofer to record or drive a separate pair of speakers.
Stereo mode must be selected to ensure that the centre channel is mixed onto the left
select the mono mode() or the stereo mode() with the button+ 3.
