Examples of using Surface pressure in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Even in the case of high mechanical loads and the maximum recommended surface pressure of 150 MPa, the plastics dampen vibrations and absorb even severe impacts.
provided a surface pressure of 1.3±0.1 Pa.
low-emission engine technology and low surface pressure.
So, precise values of Pluto's surface pressure were impossible to calculate in previous times.
Aesthetically, except that it had little resin, due to the surface pressure has been very good.
Thus a considerably larger contact surface becomes available resulting in a much lower surface pressure.
Ruukki Raex special steel can withstand wear and surface pressure and the range has now been expanded to include the thicker wear-resistant steels needed, for example,
The load on a plain bearing is expressed by the surface pressure(p) on MPa corresponds to N/mm 2 With it the radial load is distributed over the projected surface of the bearing.
Absolute values of surface pressure are difficult to obtain from occultation data,
So, surface pressure has to be extrapolated,
the drylin R systems minimise noise emissions and reduce surface pressure by the larger contact area between guide and shaft.
similar temperature, surface pressure and moisture properties throughout.
at the same time, the surface pressure is lower than in the case of recirculating ball bearing guides.
For dynamic surface pressures of up to 140 N/mm2.
When very high surface pressures occur.
Determination of the surface pressures at bodies with circulation.
For static surface pressures up to 140 N/mm2.
This process produced surface pressures higher than 450 N/mm2. Materials.
For edge loading in connection with high surface pressures.
If a frontal collision occurs, enormous surface pressures arise briefly between these components.