Examples of using The LED flashes in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Make sure that the LED flashes as shown in the illustration below.
When your smartphone is connected to the wireless network, the LED flashes green.
As soon as the desired temperature is reached, the LED flashes.
When the battery is not fully charged, the LED flashes green.
When the battery has a full charge, the LED flashes white.
Note: The LED flashes red to indicate low voltage.
Press both headphones at the same time until the LED flashes.
The LED flashes three times to indicate that the operation has been completed.
Shortly after turning on the LED flashes, indicating that it is looking for devices.
The LED flashes when the router goes through its self-diagnostic mode during boot-up.
After turning on the device, the LED flashes and it is ready to operate.
When the LED flashes, one or more service warnings are active.
Count the numbers the LED flashes.
If the battery has sufficient power, the LED flashes once.
Depending on the error, the LED flashes in different sequences(0.5 s on- 0.5 s off)
If the LED flashes each time the transmitter is triggered,
If the LED flashes alternatingly in red
The LED flashes briefly at regular intervals,
The LED flashes alternatingly in red
press“V+” for 3 seconds until the LED flashes 3 times