Examples of using The reducer in English and their translations into Spanish
{-}
-
Colloquial
-
Official
The reducer driving system are supplied strictly according to the genuine parts catalog.
Axial with the reducer rolls by the motor, and then the foot trample connects timing.
Unscrew the cap oil reservoir of the reducer and pour the content of the syringe to the opening of oil inlet.
And meanwhile the reducer in some conditions is simply necessary for safety of the equipment
The reducer is equipped with a solenoid valve
Always make sure that the seal(if required by the fitting) is present between the reducer and the cylinder.
Use the reducer to chop small quantities of nuts,
By a special design of the reducer inserts you may fix dimensions from OD 1200(48")
Glue the 2.45 cm(1 in) conduit into the reducer as shown below in“Option 1 Installation Diagram”.
Electroless nickel plating uses hypophosphite as the reducer while plating of other metals like silver,
1 Shut off the reducer.
its operating precision and its reliability, the reducer guarantees a perfect driving pleasure.
Thanks to its sensitivity membrane and its reliability, the reducer guarantees a perfect driving pleasure.
Thanks to its operating precision and its reliability, the reducer guarantees a perfect driving pleasure.
Thanks to its operating precision and its reliability, the reducer guarantees a perfect driving pleasure.
place the reducer 2 on the chopping blade.
Almost all of this heat rejection can be absorbed by the endothermic reduction reaction occurring in the reducer.
Function works when the reducer temperature is lower than“Hot engine temp.”
When using the reducer packing shown above,
since a longer thread may cause malfunctions inside the reducer.