Examples of using Wireless receiver in English and their translations into Spanish
{-}
-
Colloquial
-
Official
The plugs on the power adaptor and wireless receiver are disconnect devices and will remain.
The RX-CAM Wireless Receiver can be mounted on the hot shoe of your DSLR
TXA-300CD have a wireless receiver for the operation with a wireless microphone which transmits on the frequency 863.10 MHz.
Insert the bolt provided into the bottom of the wireless receiver units to secure the wireless module to the speaker and tighten.
Connect the wireless receiver via the Audio Out-socket
Our engineers have developed a new housing concept which enables wireless receiver units with one, two or four relay outputs to be integrated in very compact housings.
Refer to the small marking on the rear of the wireless receiver units to ensure that the correct receiver unit is used for left or right speaker.
The wireless receiver has a balanced XLR output for each wireless transmitter,
This means that the interpreter will need to wear a headset with an extension cord or a wireless receiver.
The steute business division Wireless will be using the Hannover Fair as a launching pad for its new generation of wireless receiver units series RF Rx SW868/915.
Wireless receiver must keep a distance at least 40cm from the meter and meter to meter
It's worth noting that WR A and WR B are only functional when the wireless receiver modules are installed.
EWI5000 Cleaning Cloth Wireless Receiver EWI5000 Editor Software(download)
The wireless receiver will now send the EWI5000's audio to your computer.(The wireless receiver's Line Outs will not play the signal from your computer.).
The Pairing Function assigns each Camera to a diff erent channel on the Wireless Receiver(up to 4 Cameras),
plug your lamp into the bottom of the wireless receiver Fig. 3.
USB hub to increase the space between your wireless receiver and the USB3.0 connection port.
You must press the pair button on the camera within 30 seconds of pressing the PAIRING button on the wireless receiver.
The device was unable to send measurement results to the wireless receiver seca wireless printer or PC with seca USB wireless adapter.
Iii Plug the AC-DC adaptor to the DC Jack connector of wireless receiver unit from the hole provided underneath the aluminium casing.