Examples of using A thickness in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
With household jigsaws tend to perform cuts wood parts having a thickness less than 7 cm, and 4.2 mm steel.
The thickness of the armor belt cruisers"Takao" was equal to 127 mm, a thickness of bronhialny- 35 mm(above the EU 70-90 mm) wall add-ons- 10-16 mm.
Strenx 700 MC Plus is available up to a thickness of 12 mm
Granite, porphyry, basalt, sandstone and other monumenti and building stone, not further worked than squared b sawing, of a thickness not exceeding 25 centimetres ex 25.17.
Each of these types of cable laid under the screed, having a thickness of 3-7 cm;
Aluminium foil, backed, of a thickness"excluding any backing" of< 0,021 mm excl.
Thus it is desirable to select a polyethylene film having a thickness of 100-200 microns.
coated with zinc, of a thickness< 2,5 mm.
similar backing materials) of a thickness(excluding any backing)
Thus, from the point of view of the mass of mounted units correspond to the steel armor plate of a thickness not exceeding 6 mm.
Initially, a deep litter for insulation is laid with a layer having a thickness of 20 cm.
similar backing materials) of a thickness(excluding any backing)
uncoated, of a thickness not exceeding 1Â mm.
Cutting, by sawing or otherwise, of stones(even if already sawn) of a thickness exceeding 25 cm ex 2516.
Computer-assisted design is therefore a great solution if a thickness reduction of at least 0.5 mm is reached with the frame and centering data provided.
Replacement is a type of grip that is characterized by a thickness between 1.5- 1.9 mm.
They have a thickness of approximately 20 µm
coating layer with a thickness of approximately 0,1 mm is applied to the object.
OPTIMA is therefore a great solution if a thickness reduction of at least 0.5 mm is reached with the frame and centring data provided.
For trimming plastic edging with a height of 18- 65 mm and a thickness of 0.5- 2.0 mm(depending on material).
