Examples of using Potentiometer in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
A more common resistive sensor is in the form of a potentiometer.
Output Setting: 10 turns on the precision potentiometer to reach maximum output.
The wireSENSOR WPS-MK88 U45R has replaced the conventional, analog hybrid potentiometer with a non-contact potentiometer.
Endstop signals and absolute positioning- mechanical potentiometer feedback.
Instruments for measuring voltages include the voltmeter, the potentiometer, and the oscilloscope.
set potentiometer to control speed.
Potentiometer with silver indicating electrode
Connect the electrodes to the potentiometer(4.1) and, after verifying the zero of the apparatus, note the value of the starting potential.
The potentiometer works by balancing the unknown voltage against a known voltage in a bridge circuit.
A potentiometer on the spotlight allows the brightness of each luminaire to be individually matched to the specific area of the painting.
At the same characteristics of the potentiometer is directly dependent on the speed of the capacitor charge.
The table shows the position for the potentiometer to IPE-GS, ie the pulse extension(the injectors opening time) as required for the fuel.
A significant advantage of the IPE-GS is the potentiometer that controls the pulse extension also are able to control it for other devices.
Turn the potentiometer clockwise until the output current correspond with the object temperature(see output characteristics).
the processing method: the potentiometer returns to zero.
the adjustment potentiometer RW.
Potentiometer VR1 is used to vary the fundamental frequency whereas potentiometer VR2 is used as power control.
However, the new draw-wire sensor from Micro-Epsilon operates reliably for more than five years due to a non-contact potentiometer.
capacitors, and the potentiometer has been carefully selected for premium fidelity and tone.
This particular condition is not a problem for me to meet because I can turn the potentiometer after the LEDs on my RCW panel