Examples of using Static load in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
It should be noted that the sacroiliac joint carries the main static load of the body.
between heavy loads and the process of lifting, literature indicates that static load should not be underestimated.
The max limit static load is the value above which the load applied to the element may cause some plastic material breakage,
And, due to its inclusion in the calculations of static load for new buildings, it enables simpler
Hinges with built-in safety multiple switch, the reference value supplied is the max limit static load(Sa, Sr,
The max limit static load is the value above which the load applied to the element may cause some plastic material breakage, under particular conditions of use.
The use of an aluminum tube may cause a decrease in the max limit static load equal to 25% due to possible deformations of the tube section under load. .
This largely removes the static load on the spine, which takes on the developed musculature of the back and neck.
It is easier to avoid professional injuries caused by extensive static load by dividing the bodyweight between legs, seat area and back-support.
A study was performed to find out the greatest influence on static load and on the time needed to wash the patient/resident.
The use of an adequate mechanical aid, tailored to the resident's/patient's mobility level contributes to reducing the static load on the caregiver.
A study was performed to find out the greatest influence on static load and on the time.
The universal testing machine is a mechanical forcing machine used to test the mechanical properties of various equipment such as static load, tension, compression,
it is enough to compare the load capacity for each wheel with the static load indicated in the manufacturers' catalogues.
The glass filled grades are suitable for parts that have to bear high static loads.
Support arm system CP 40, stainless steel for static loads up to 400 N.
For static loads, single use and non relocatable.
For use with static loads only.
can withstand high static loads.
For use with static loads only. Specifications.