Examples of using Elevated temperatures in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Due to high chromium and some aluminum content, good resistance in oxidizing sulfur bearing atmospheres at elevated temperatures is demonstrated.
In general, equipment is not available for determining maximum bending strain at elevated temperatures.
Good resistance to oxidation, but like other highly alloyed grades suffers from structural instability(precipitation of brittle phases such as sigma) at elevated temperatures. 904L should not be used above about 400C.
Severe post-vaccination reaction to the previous infanrix injection(hyperemia at the injection site or edema more than 8 cm in diameter, elevated temperatures up to 40 ºС and more) or complication after previous vaccination(continuous crying lasting at least 3 hours, shock-like state or collapse within 48 hours after vaccination; convulsions, including those accompanied by fever, for 3 days after vaccination);
Inconel® 600 is a nickel-base alloy with excellent carburization, and good oxidation resistance at elevated temperatures. The alloy has long been used in the heat treating industry for many of the same applications as RA330®. 600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities.
And elevated temperature mechanical properties of 2507 sheet and plate are shown below.
Liquid metal battery is designed to operate at elevated temperature with minimum regulation.
Both 347/347H are used primarily in elevated temperature applications.
High hardness at elevated temperature.
Provide strong, durable fixings even in elevated temperature applications.
Non-alloy steel tubes with specified elevated temperature properties.
Retains high mechanical strength, stiffness and hardness under elevated temperature;
Both 347/347H are used primarily in elevated temperature applications.
Good resistance to oxidation at elevated temperature.
Observe bed rest, especially at elevated temperature.
The connectors are subjected to 100 hours at an elevated temperature of +100℃.
Electricall resistance or induction welded steel pipe tubes for elevated temperature.
High creep, stress-rupture and tensile strength at elevated temperature.
ER312 contains about 2% molybdenum to increase its creep resistance at elevated temperature.
Specification for low tensile carbon steel tubes without specified elevated temperature properties.