Examples of using Pressure difference in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The end pressure of the post-treatment equipment can effectively eliminate the pressure difference and waste energy.
Reliable: Simple and compact structure, combined with the advantages of direct-acting solenoid valves, it can work reliably even under low pressure difference or zero differential pressure. .
When the resistance of the equipment reaches the value set by the manufacturer, the pressure difference monitoring system will send out a signal, and then the dust cleaning mechanism of the bag dust collector will start to work.
This can be judged according to the pressure difference of the system, the temperature of the inlet and outlet, the voltage and current of the main motor and so on, and discharge the fault in time.
Automatic two stages reverse osmosis device is an equipment to purify the saline water with the action of pressure difference of semi permeable membrane.
The pneumatic diaphragm pump in the mine USES the pressure difference in the air chamber to alternately produce the suction liquid pressure and the positive liquid pressure in the liquid chamber, and the control valve switch can ensure the positive flow of the liquid.
Before opening the gate valve, open the bypass valve first, let the pressure water fill the elbow through bypass valve, balance the pressure difference in the front and back of gate valve, reduce the torque for opening the gate valve.
In operation, the pressure difference of the air blower is used to automatically send the lubrication to the drip nozzle, and then drip into the cylinder to reduce friction and noise, and at the same time keep the gas in the cylinder from flowing back.
The poppet moves under these two pressures and the spring force and stops at the equilibrium position, so that between these two pressures, the difference, that is, the pressure difference across the throttle valve, maintains the constant-spring pressure. .
Note: Thermal expansion and contraction cause pressure difference btween internal and external of the lamp body, mist in interior lamp body and the waterproof problem and etc. Compressed Mechanical seal technology and Air pressure balance thread plug is to solve this basic problem of the outdoor wall washer.
Wedge-type sealing construction. Traditionally, the valve would be sealed through the mechanical force provided by the stem to wedge-press the ball onto the valve seat. With this design, the sealing performance of the valve would never be influenced by the fluctuation of the pressure difference in pipeline. And the performance would be maintained reliably under all the operating models.
RO series reverse osmosis device is water treatment machine to purify the saline water with the action of the pressure difference of semi permeable It is called reverse osmosis as it is counter to natural penetration direction Different materials….
If the flow rate≥250L/ min of lubrication system which will transfer the lubricating oil from the steam heating reservoir, the pressure gauge is mounted on the dashboard to measure the pressure difference of cooler, all of the main parts for≤125L/min are mounted on the lubricating oil reservoir as the overall structure.
When the controller sends a signal to control the vent is opened, the pulse valve back pressure gas discharge pressure reducing, outdoor produce pressure difference on both sides of diaphragm, diaphragm displacement due to the differential effect, injection pulse valve opens, the compressed air from the air bag, through the pulse valve by spray torch holes out from the spray torch gas for a wind.
The 2 way flow control valve of 2FRM series is the combination of pressure difference reducing valve and throttle valve in parallel connection. The 2FRM two way flow control valve applies for the principle: the changes of flow rates leads to different oil pressure in pipeline, which will be able to keep the pressure through the negative feedback of valve poppet to automatically adjust the difference pressure in the throttle section.
Higher acceleration creates higher pressure differences.
Low pressure difference, stable flow.
Is the working pressure difference inappropriate?
Inappropriate fluid pressure or working pressure difference.
Is the working pressure difference inappropriate?