Examples of using Straight pipe in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Single-wall Straight Pipes.
Premium rectifier, not hard demand on straight pipes in down and up stream.
Ensure enough straight pipes at upper& down stream.
When there is long enough straight pipes or the pipe diameter is>Ø250,the sensor should be in the¼ of the pipeline.
The ideal installation site should choose the measurement point where inlet and output has enough straight pipes.
PVC pipe fittings. PVC pipe fittings are available. Purchase price was very straight pipes. 1.00.
The coal fired hot water boiler, the internal heat-receiving pipes are all straight pipes, and there are enough cleaning devices to facilitate the operators to clean the dirt and facilitate the quality inspection.
Biomass hot water boiler, the internal heat-receiving pipes are all straight pipes, and there are enough cleaning devices to facilitate the operators to clean the dirt and facilitate the quality inspection.
Straight Pipe Wrenches.
Oil separator outlet backstop shut-off valve Manifold adopts hard straight pipe.
The longest straight pipe should be used between flow resistance part and flowmeter.
Requirement for the straight pipe: D is the inner diameter of the flow meter.
Installation above, there is no requirement for upstream and downstream straight pipe sections.
Long straight pipe sections are required to be installed upstream and downstream of the turbine flow sensor.
If attaining the appropriate straight pipe length upstream is not possible, then flow conditioning is also a practical alternative.
Sensor inlet straight pipe section and outlet straight pipe section.
OEM Boron Carbide Venturi Nozzle with Aluminum Jacket has a structure of converging section, straight pipe section and diffusion section.
Because it does not require long straight pipe runs or flow conditioning devices, the V-Cone flow meter can fit into tight spaces.
The pipe configuration prior to and after the flow meter plus the length of a straight pipe at flow meter's inlet and outlet.
The length of straight pipe≥ 40D for upstream and≥5D for downstream if two 90°elbows on different planes in upstreamshown as Fig. 5.