Examples of using The pad in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Rubber pad is very good, when people step on the mat on the ground without the pressure pad is soft and elastic, walking in the above is very comfortable, and the pad restitution speed, so it can eliminate fatigue people walking quickly, at the same time when people frolic in the mat, but also to people's body better security.
Place a cotton pad against the pump, then press 2 to 3 times to soak the pad. Begin by wiping each eye with a separate cotton pad and then continue on to wipe the remainder of the face with another cotton pad. Reapply if necessary to remove make-up completely. Use in the morning to awaken and stimulate the skin. Use in the evening to effectively eliminate make-up from the face and eyes. Do not rinse.
Place a cotton pad against the pump, then press two to three times to soak the pad. Begin by wiping each eye with a separate cotton pad and then continue on to wipe the remainder of the face with another cotton pad. Reapply if necessary to remove make-up completely. Use in the morning to awaken the skin and in the evening to effectively eliminate make-up from the face and eyes. It is not necessary to rinse following application.
The pads are covered with black, sturdy, but not stiff skin.
To avoid trouble with the pads and discs.
Over time, in place of the pads there are columns of yellow and red.
This will remove the particles of reagents from the pads.
Insert the padding and close the seam.
Specify the padding for th and td elements.
AND THE RiGHT FRONT SCREW well above the pads.
The pads are not corrugated, just matte, which impairs grip in a wet hand.
During the reflow process it must be assured that no solder material reduces the insulation distance between the pads below the arrester.
Sewing: Sew together the cushion pieces with 1 cm seam allowance, leaving a slot for the padding filling.
Repeat a similar action on the foot with the force holding the pads of the thumbs up and down.
Then you need to remove excess wool from the pads of the paws, into the groin and around the armpits.
But for a more robust design it is desirable to set the prepared holes in the pads from the rubble, and then fill with cement mortar.
Precise amount of material solder pasteto its exact location on the pads of the PCB.
EASY MAINTENANCE: Rubber stair mats install quickly with the use of adhesive backing and are easy to clean simply wipe or rinse the pads with water.
In some cases, existing arms or forks may also be welded onto the pads.