Examples of using The spool in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Choosing G or E spool type of hydraulic spool valve to cut inlet fluid flow and quick stops actuators' movement when the spool in central position.
If your rod is pointed to the left while reel line in, the line will load higher on the right side of the spool.
This wide space allows for Albright or similar connection knots, as well as swivels and copper line to pass through the guide easier and be wound directly on the spool.
The spool may be fabricated from wood, metal, plastic, cardboard or a combination thereof. CI-1201.
If you reel line with your rod pointed toward the right, the line will load up higher on the left side of the spool.
Direct acting valves have a system where the pressure pushes directly against the spool or the piston.
To ensure that, regardless of the direction of one-way installation, the spool can be reset.
Ordering code of WH/O means: there is no spring and locating device inside the valve, the spool is mounted with control plungers.
For Casting Reels: If you reel line with your rod pointed toward the right, the line will load up higher on the left side of the spool.
Ordering code of WH/O means: there is no spring and locating device inside the valve, the spool is mounted with control plungers.
If your rod is pointed to the left while reel line in, the line will load higher on the right side of the spool.
The Spool Access Port allows for quick access to the spool by simply sliding the lock/unlock lever on the side plate opposite the handle.
The spool and poppet form of the hydraulic cartridge can be roughly divided into two major categories: spool sealing valve and poppet sealing valve.
The spool is an assembly of cut-to-length steel pipes, elbows, tees, reducers, cross, flanges, etc.
When the lubrication system operates t again, the spool of directional control valve 1a is in the opposite position, at this moment, the grease or oil supply pipe line exchanged.
A spool of wire is affixed to the spool arm, and the wire is placed along tiny rollers for smooth movement.
The spool of the valve can be rotated and controls working oil port on or off, to achieve fluid flow direction, pressure and flow control.