Examples of using Diodes in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
The load current is then left to freewheel through the devices body diodes during the deadtime when both devices are turned off.
Diodes laser lampas are of the famous Japanese brand'Mitsubishi', good quality. 176 diodes. .
Light-emitting diodes(LEDs) are used to send signals in multimode fiber cables, and multi-mode cables are usually used over short distances.
The NXP Bi-Polar Division product portfolio(Diodes, Thyristors& Transistors) has been transferred to WeEn Semiconductors(Jan 19, 2017).
The output across the diodes is connected to a large value capacitor, which eliminates AM noise
This characteristic can be a problem for diodes with transparent or glass bead bodies such as the 1N4148 signal diode. .
They look like transistors but they have two power diodes inside.
is about 10uA for geranium and 1uA for silicon type diodes.
a three year warranty on the diodes.
Gallium nitride(GaN) is a binary III/V direct bandgap semiconductor commonly used in light-emitting diodes since the 1990s.
There are three different types of LED monitors available based on the manner how the diodes are arranges in the monitor.
Unlike silicon it is direct bandgap, and so can be used in laser diodes and LEDs to directly convert electricity into light.
and tunnel diodes.
printed circuit boards and light-emitting diodes.'.
LED lighting of this sort is typically made up of clusters of LEDs, since individual diodes produce only a small amount of light.
does not use Cree LEDs, but uses our own proprietary 18K white diodes.
one of my favorites, and it does seem that my clams have begun to color up a touch under the UV diodes.
there are diodes and resistors inside to act as a buffer to protect the battery
Diodes are composed of two conductive materials, such as silicon or germanium; the light-emitting variety
In the second bag were two self-tapping screws, four diodes(needed according to the scheme if put in parallel with the standard signaling to decouple the sensor polling circuits),