Examples of using Two surfaces in English and their translations into Vietnamese
{-}
- 
                        Colloquial
                    
 - 
                        Ecclesiastic
                    
 - 
                        Computer
                    
 
Open singles titles on all three surfaces(grass, clay, hardcourt), while Chris Evert is the only woman to win on two surfaces(clay, hardcourt).
Ultrasonic Plastic Welding Machine for Remote Control Ultrasonic welding machina is the application of high frequency vibration waves to two surfaces that need to be welded In the case of pressurization the surfaces  of two  objects are rubbed….
a relevant granite marble and engineered stone job Seaming two surfaces is important to treat as an art to make the seams nearly invisible 2 That is.
is trying to get you thinking logically, I think your hard disk is a magnetic disk 1 two surfaces, you can split it in two  out of a partition to be active.
motors are very efficient and cheap, problems associated with the brushed DC motor is that sparking occurs under heavy load conditions between the two surfaces of the commutator and carbon brushes resulting in self generating heat,
total reflection on AC, BC two surfaces will occur, and finally along the opposite direction of the incident, the opposite directions
The ground ring is amounted on the two surface of the sensor, it must be isolated from the.
Two surface without defects, such as the layering, crack, burr
known as anti-reflection glass, is the use of magnetron sputtering on the two surface of the ultra.
Picking a winner out of these two Surface 2-in-1s is difficult, as it's a case of
The technique hinges on the fact that the virus typically enters T cells by latching onto one of two surface proteins known as CCR5 and CXCR4.
Contact of two surfaces.
Special PTFE sliding layer covers two surfaces.
Sealing is done between two surfaces rubbing.
The Plaza is organized around two surfaces.
Fold and seal two surfaces with bolts;
Lubricating oil is meant to reduce friction between two surfaces.
Instead, the two surfaces disappear into a light gap between them.
Below indicates that there is a usually space between the two surfaces.
Between these two surfaces is a fluid film generated by the pumped product.