Examples of using
初期条件
in Japanese and their translations into English
{-}
Colloquial
Ecclesiastic
Computer
Programming
できないが、特定の初期条件・境界条件に対応する数値解を求めることはできる。
But still it is possible to obtain its numerical solution corresponding to specified initial condition and boundary condition..
初期状態ベクトルを定義するには、[初期条件]パラメーターを使用します。
To define the initial state vector, use the Initial conditions parameter.
NWP予測の初期条件は、気象観測データをモデルに組み込んで構築する解析から得られます。
The initial condition for an NWP forecast comes from the Analysis, which is constructed by assimilating various meteorological observations into the model.
初期条件における本磁気システムの総重量は350kgであった。
Gross weight of the platform with magnetic system in the initial condition was 350 kg.
As the initial condition for tsunami, static deformation of the seafloor is calculated for a rectangular fault model[Okada, 1985] using the source models.
押した後初期条件(セクション1を参照)の設定の可能性とポップアップ画面を起動します。
After pressing the startup screen will appear with the possibility of setting the initial conditions(see Section 1).
When one analyzes complex systems, sensitivity to initial conditions, for example, is not an issue as important as within the chaos theory in which it prevails.
The derivative of y with respect to x is equal to y cosine of x divided by 1 plus 2y squared, and they give us an initial condition that y of 0 is equal to 1.
The initial conditions are set to their nominal values as shown, and PSPICE is instructed to skip bias point calculations by checking the appropriate box in the simulation settings dialog box.
Starting from an initial condition and moving forward in time, a deterministic process will always generate the same trajectory and no two trajectories cross in state space.
These models can successfully predict strategies and outcomes in fixed situations approximating the initial conditions of the models, but they cannot predict outside that range.
初期条件y0および解の取得対象期間(t0,tf)を使用して、解を反復的に求めます。
Using the initial condition, y0, as well as a period of time over which the answer is to be obtained,(t0,tf), the solution is obtained iteratively.
In the MAC method, and other methods that use the self-correcting feature, any non-zero velocity divergence in initial conditions is automatically removed after the first cycle of calculation.
Starting from an initial condition and moving forward in time, a deterministic process always generates the same trajectory, and no two trajectories cross in state space.
Thus the resultant set of equations is too complex to be solved for a general solution. But still it is possible to obtain its numerical solution corresponding to specified initial condition and boundary condition..
If the initial conditions determine the arrow of time, perhaps it is possible to create systems on Earth with initial conditions that force the arrow of time to run in the opposite direction.
日本語
中文
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt