local oscillator
局部 発振器局部 発振
local-oscillator
局部 発振器局部 発振
ここで2つの正弦波の乗算を考えます。これは、次式のようになります。式1によれば、2つの正弦波(1つは入力信号となる正弦波、もう1つはレシーバミキサの局部発振器)を乗算すると、出力周波数は入力周波数の2倍になって(振幅は1/2)、入力振幅の半分のDCオフセットに重畳されることがわかります。
Euler's relations state the following: Now consider multiplying two sine waves together, thus: From Equation 1, it can be seen that multiplying two sine waves together(one sine is the incoming signal, the other is the local oscillator at the receiver mixer) results in an output frequency double that of the input(at half the amplitude) superimposed on a DC offset of half the input amplitude.
The LitePoint z8801 PXI Local Oscillator.このダウンコンバータ局部発振器は、すべてのレシーバチャネル間で一貫性があります。
The downconverter local oscillator is coherent among all the receiver channels.セルラやPCSのチャネル番号を入力すると、スプレッドシートは入力されたレシーバIFに基づいて、トランスミッタ出力、レシーバ入力、主要な局部発振器の周波数、及びトランスミッタIFを自動的に計算します。
When the cellular or/and PCS channel number is entered, the spreadsheet will automatically calculate the transmitter output, the receiver input, the main local oscillator frequency, and the transmitter IF, based upon the entered receiver IF.各部品の例としては、ダイナミック性能の高いADC、可変利得アンプ、ミキサおよび局部発振器とし、代表的なアプリケーションであるBTSにおける使用の詳細、および高ダイナミック性能、高いインターセプト性能、さらに低ノイズを達成するために、それらがいかに厳しい要求を満たすかを詳述します。
The following paper identifies these demands in signal chain components such as high dynamic performance ADCs, variable gain amplifiers, mixers and local oscillators and details their use in a typical BTS application and how they meet the stringent requirements for high dynamic performance, high intercept performance and low noise.LitePointz8801PXI局部発振器(LO)は、極低位相ノイズ用に最適化されたYIGベースの2GHz~8GHzのLOです。
The LitePoint z8801 PXI Local Oscillator(LO) is a YIG-based 2 GHz to 8 GHz LO optimized for extremely low phase noise.ICを実装する場合、システム要件を満たすように局部発振器ドライバノイズの規定および設計に注意を払う必要があります。
In an IC implementation, care has to be taken to specify and design the local oscillator driver noise to meet the system requirements.内部局部発振器ドライバ段を提供するミキサと変調器の統合ソリューションでは、内部回路によって広帯域入力ノイズが低下します。
In integrated mixer and modulator solutions that provide internal local-oscillator driver stages, the wideband input noise is degraded by the internal circuitry.PLL周波数シンセサイザ多くの携帯電話においては、第1の局部発振器(LO)は位相ロックループ(PLL)周波数シンセサイザによって生成されます。
PLL Frequency Synthesizer In many cell phones, the first local oscillator(LO) is generated by a phase-lock loop(PLL) frequency synthesizer.これらのミキサは、内部に局部発振器ドライバを備えているため、大信号の外付けドライバアンプは不要です。
These mixers have internal local-oscillator drivers, eliminating the need for large-signal, external driver amplifiers.したがって、ミキサに印加する前に局部発振器の残留ノイズにフィルタリングすることが可能です。
Therefore, it is possible to filter the local oscillator residual noise before applying to the mixer.局部発振器(LO)の入力は元の送信信号です。一方、RF入力は受信信号です。
The local-oscillator(LO) input is the original transmitted signal and the RF input is the received signal.特に、電気スペクトラムアナライザの局部発振器の位相ノイズは、結果に影響を与えることがある[14]。
In particular, phase noise of the local oscillator of the electronic spectrum analyzer can affect the results[14].アップコンバートされた信号は、局部発振器バッファ出力の持つスペクトルのスカートとフロアを示します。
The upconverted signal takes on the spectral skirt and floor of the local-oscillator buffer output.これらのパスには、共通の局部発振器(LO)から位相が90°異なる信号が供給されます。
Two parallel paths with independent mixers are fed from a common local oscillator whose phase is offset 90° to one of the mixers.これらの装置は、-3dBmという低い局部発振器レベルで動作します。
These devices can work with local-oscillator levels as low as -3dBm.局部発振器の光周波数のわずかな変化は選択されたチャネルを変えることができるので、局部発振器の線幅の要件は高い。
Slight change on optical frequency of the local oscillator can change the selected channel, so the requirements for line width of local oscillator are high.領域3は、特性の直線部分であり、SNR劣化は主として局部発振器ノイズによって決まります。
Region 3 is a straight-line portion of the characteristic where the SNR degradation is mostly determined by local-oscillator noise.結論この記事では、基地局用ICミキサの設計規定における局部発振器バッファアンプノイズの役割が考察されました。
Conclusions The role of the local oscillator buffer amplifier noise in a base station IC mixer design specification has been discussed in this article.ミキサは、信号の流れをIとQの経路に分割する内蔵の直交局部発振器によって駆動されます。
The mixer is driven by an internal quadrature local oscillator which splits the signal flow into I and Q paths.
Results: 35,
Time: 0.0293