線膨張 in English translation

• linear expansion

Examples of using 線膨張 in Japanese and their translations into English

図18各種材料の線膨張係数。
Figure 18: Comparison of linear expansion coefficients.

残存線膨張収縮率1400℃*3h±0.5。
Permanent linear change 1400℃*3h±0.5.

低線膨張係数・低粘度化のためのフィラー高充填技術。
High filler filling technology for low linear expansion coefficient and low viscosity.

負荷の下の耐火性:1650残存線膨張収縮率:0.2。
Refractoriness under Load: 1650 Permanent linear change: 0.2.

吸水性が極めて低く、線膨張係数も低いことから寸法安定性に優れています。
PPS has superior dimension stability because of its extremely low water absorption and low linear expansion coefficient.

なお、線膨張係数を低下させたことで長期的な接着安定性にも優れている。
In addition, R-PENTAM exhibits superior adhesion stability over extended periods due to its lower linear expansion coefficient.

そのため、従来は無機充填材が利用できず、線膨張係数が大きいという問題がありました。
This has ruled out the use of conventional inorganic fillers, meaning that we were left with the problem of how to reduce the high linear expansion coefficient.

KFPプラスチック用箔ひずみゲージアクリル樹脂などのプラスチック材料のひずみ測定に適し、線膨張係数65×10-6/℃に適合しています。
Foil Strain Gages for Plastics The KFP series foil strain gages provide an applicable linear expansion coefficient of 65 x 10- 6/ºC, which makes them suitable for strain measurement of plastics such as acrylic resin.

更に、部品の大型化やボディの一部との一体化に伴い低線膨張率化など寸法安定性の要求が一層厳しくなってきている。
Requirements for dimensional stability, such as low linear expansion, have also become more stringent with the use of larger parts and integration with body sections.

自然モリブデン及びタングステンは、処理のタングステン容易に比べて、線膨張係数の低い沸点及び電気伝導性を強調し、非常に類似しています。
Molybdenum heat shield is very similar to the nature of the molybdenum and tungsten in its boiling point and electrical properties. compared with tungsten ease of processing linear thermal expansion coefficient is small.

それを、屈折率の値と波長分散を、樹脂組成の屈折率に合わせた複合金属酸化物を使うことで解決し、透明性と線膨張係数を両立させた製品を開発しました。製品情報はこちら。
We were able to overcome this problem by using a composite metal oxide with a refractive index and wavelength dispersion characteristics that were the same as those of the resin to develop a product that was both transparent and had a low linear expansion coefficient.

BOOK比重引張強さ曲げ強さ圧縮強さ圧環強さ硬さアイゾット衝撃強さ(ノッチ付)線膨張係数膨潤率基材形態(注1)JISK6911
BOOK Specific gravity Tensile strength Flexural property Compressive strength Radial crushing strength Hardness Izod impact strength(with notch) Co-efficient of linear expansion Swelling rate Shape of base material(Note 1)

超硬シースイートので、特に道具や材料に適し、かつ、その貧しい靭性、高脆性の高硬度、良い赤硬度、耐摩耗性、耐腐食性、線膨張および他の特性の低い係数を、持っている、一般的な機械加工することはできません、多くの場合、特定の仕様シートを作られています。
Because tungsten carbide sheet with high hardness, good red hardness, wear resistance, corrosion resistance, low coefficient of linear thermal expansion characteristics, it particularly suitables for tools and materials, and because of its poor toughness, high brittleness, and can not be general machinery machining, sheet metal are often made for certain specifications.

低線膨張、高剛性でフィルムの新たな可能性に挑戦特殊鱗片状「フィラー」を熱可塑性樹脂と複合化することで、低線膨張係数、高剛性を兼ね備え、リサイクル可能な熱可塑フィルム用複合材料です。
We take on the challenge of finding new possibilities in film offering low coefficient of thermal expansion and high hardness This series of Poticon features a unique scale-like filler that is compounded into thermoplastic resins to create films offering low coefficient of expansion, high hardness, and excellent recyclability.

モリブデン熱シールドは、次の特性があります。線熱膨張係数が小さい、容易な処理、低い熱伝導率、比熱です。
Molybdenum heat shield has the following characteristics: linear thermal expansion coefficient is small, easy processing, low thermal conductivity, small specific heat.

各ナイロンの線膨張係数は表5.2のとおりです。
Table 5.2 shows the linear expansion coefficient for each nylon type.

トレリナ®の線膨張係数をTable.2.3に示します。
The linear expansion coefficient of TORELINA is given in Table. 2.3.

線膨張係数(23～55℃、流動方向)。
Coefficient of linear thermal expansion(23- 55℃、Flow direction).

ヤング率、ポアソン比、線膨張率、密度の設定。
Young's modulus, Poisson's ratio, linear expansion coefficient, density setting.

線膨張係数(23～55℃、直角方向)。
Coefficient of linear thermal expansion(23- 55℃、Transverse direction).