Voorbeelden van het gebruik van Few millimetres in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
If necessary, small adjustments(i.e. a few millimetres at a time) are made.
Each zooid is a few millimetres in size, but is embedded in a common gelatinous tunic that joins all of the individuals.
On top of this upper layer of a few millimetres a mixture of water,
Only a few millimetres in diameter, the tubes can be designed specifically for selected disturbing frequencies.
The parallel laser beam is thus only a few millimetres underneath the cutting nozzle, focussed on the top of the material being processed.
If they fire the device a few millimetres to the left of my brain's motor cortex,
A lift of a few millimetres is enough to open the eyes without making them look unnatural.
The micro-injection module is ideal for producing a POM gear wheel measuring just a few millimetres and weighing 0.001 g.
Use the calliper to lift it a few millimetres… and then turn it clockwise 360 degrees…
The KD5100 measures the deflection of this mirror in the range of a few millimetres.
the BO segment selected for treatment should include normal tissue margins of a few millimetres at the proximal and distal ends.
are only a few millimetres deep and these furrows have to be very carefully engraved by hand.
varying from a few millimetres to several meters.
fully-automated sawing machines, we are capable of sawing micro-lengths with a high degree of accuracy, starting from a few millimetres.
These are small blood vessels that dilate a few tenths of a millimetre to a few millimetres in diameter.
ranging from a few millimetres to theoretically infinite on rolls.
which is a lot higher than the global sea-level rise of a few millimetres a year.
When the ice melts and gets thinner, the earth readjusts, and rises immediately by a few millimetres, which depends on the ice lost', explains Barletta.
But, if you just dig a tiny bit below the surface, then you see that this layer of gypsum is only a few millimetres thick, and then immediately the ground beneath it turns this greeny colour.
Different profile-bending machines can be used to process profiles ranging from profile cross sections of a few millimetres in diameter up to pipelines with a cross-section of over two metres.