Примеры использования Beveled на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
feature windows beveled and leaded glasses& pressed steel ceilings.
Table top: MDF-board with beveled edges and laminated surface available in following laminate colours:
Shinex GEM" automatic edge diamond polishing pad is designed to polish straight and beveled edges on granite.
made with a brush beveled.
The central dome is four-sided, with beveled edges and has four windows on each side.
Shinex GEM" automatic edge diamond polishing pad is designed to polish straight and beveled edges on granite.
laminate coating LK4501A 40x25mm wide mirror surface edge beveled in frame 20mm.
designed for single- or multiple-head automatic CNC edge polishing machines for straight and beveled edge polishing.
Also, the fiber glass content of the plastic material on the PCB beveled edge can cause permanent damage to the contact surface during insertion.
The face of the diamond cup wheel has a beveled edge to allow the grinder to move easily along the surface
and the new,"beveled" wingtips.
After securing the upper blade, be sure that there is no gap left between the upper blade and the beveled surface of the blade holder.
Other features include staggered locking tuners, two-point synchronized American Deluxe Tremolo Bridge with pop-in arm, and beveled neck heel.
Preparing a typical header with 82 beveled holes, is typically reduced from 26 hours to 2 hours.
With the PC600 CNC Pipe Cutter the fabrication of a typical header with 82 beveled holes on it, which usually takes around 26 hours, was reduced to only 2 hours.
With the RBPC roller bed CNC Pipe Cutting Line, fabricating a typical header with 82 beveled holes, which typically takes around 26 hours, is reduced to only 2 hours.
the window can be made beveled and arched, as well as a very small radius.
With the MPC plasma cutting machine for pipe and box cutting a typical header with 82 beveled holes on it, which usually takes around 26 hours to be fabricated, can be fabricated in only 2 hours.
Building corners that come out onto an intersection are all beveled to avoid any right angles at pedestrian level.
in one point because it is narrowed in the bottom by a beveled cut.