Примеры использования Coefficient of friction на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
as indicated by scientists can help in the design of materials with low coefficient of friction.
the new pads demonstrate better results when being measured for the coefficient of friction.
White Pearlised BOPP film with very wide heatsealing range and standard coefficient of friction for packaging machines.
with a bit higher coefficient of friction and low heat sealing threshold APPLICATION.
Transparent heat shrinkable BOPP film with a wide heat sealing range and low coefficient of friction specially designed for cigarette
smooth layer with low coefficient of friction.
energy-saving belts offer a very low coefficient of friction between the belt and the slider bed.
Metallized heatsealable BOPP film with low sealing threshold and standard coefficient of friction, with barrier properties, for printing and lamination.
Metallized heat sealable BOPP film with a low sealing intention temperature, long time surface tension shelf life and standard coefficient of friction for printing and lamination.
To simulate stress transmission, we used a coefficient of friction of 0.1 to describe the contact interaction between the outer surface of the inflation balloon and the inner surface of the stent.
has smaller coefficient of friction and isn't subject to corrosion.
Metallized heat sealable BOPP film with a low sealing intention temperature and standard coefficient of friction for printing and lamination.
increasing the rotational speed to be expected to increase the coefficient of friction, as is the case with sleeve bearings under similar conditions.
In particular, low coefficients of friction were needed at high speeds when running dry.
When very low coefficients of friction when running dry are needed.
Low coefficients of friction in dry operation.
Very low coefficients of friction and wear over the entire life cycle of the product.
Coefficients of friction, wear, driving forces
When very low coefficients of friction in dry operation are required.
They must have low coefficients of friction, require no additional lubrication,